ArcolaBus | Commercial Buses | ElDorado National

Transmark

10 year heavy duty transit bus
Chassis

Transmark-RE chassis designed and built by ElDorado National Co.
Available with Cummins 1SB 5.9L (190, or 230 HP) or ISC 8.3L (250 HP) turbo diesel engines; also available with natural gas or propane
100-gallon diesel fuel capacity
255/70R Michelin steel belted highway radials
Allison MT-643 transmission is standard, B300 and B300R transmissions are also available
Wheel base is 139" or 178", depending on model
GVWR 29,000 lbs.
4.30:1 ratio rear axle is standard
8-D battery
130-amp alternator is standard
Power steering
Four-bag per axle air ride suspension
Air S-cam brakes-16.5" x 5" front, 16.5" x 7" rear with Haldex automatic slack adjusters
Electronic throttle
889 square inch side mounted radiator with integrated transmission oil cooler
11-gauge rear engine deck with five layers of noise/heat insulators
Front tow hooks
50,000 lbs. frame rail with full length liners

Body and Floor Structure

21/2" x 11/2" integral welded roll-cage
All structural steel is high-solid primed and sealed for superior corrosion resistance.
.080 aluminum exterior skin-choice of exterior body colors is standard
All window frames feature welded gussets for increased durability
Exterior sidewalls feature removable lower skirts for minimized down-time and repair costs
Entire body structure is mounted on the chassis frame via rubber isolators to reduce road shock transfer to passenger compartment.
3/4" exterior-grade plywood floor undercoated prior to and after installation to resist moisture and deterioration

Windows and Doors

39" x 43" laminated and tinted top-T slider windows, including egress capability as required by floor plan
42" x 89" air double-leaf passenger entry doors with door-activated stepwell entry door light and upper/lower loading area view windows

Electrical and Lighting

Master electro-panel with circuit breakers and relays is easily accessible in weather-sealed junction box below driver's side window.
All electrical connections are coated with dielectric spray to resist corrosion and failure.
Every electro-panel is equipped with a complete laminated circuit legend for ease of serviceability.
All wiring is function numbered and color coded for ease of identification for service and maintenance.
MotoGuard engine protection system is standard.
All wiring is enclosed in a plastic loom to resist abrasion and minimize electrical related failures.
Spare electrical circuit running from electro-panel to rear engine area is designed for reduced maintenance.
Driver control console is left of driver's seat for easy access; all switches are backlit for convenient day/night operation.
Exterior lighting features tear-drop style front clearance lights and low-profile rear clearance lights which meet all applicable FMVSS and ICC requirements.

Interior Finish and Trim

Ceiling headliner and upper wall covering is a highly durable, laminated melamine.
Lower sidewalls are finished in a scuff proof black Ozite carpet.

Safety and Convenience

Stainless steel safety stanchion on left side of passenger entry
Curb-side modesty panel and entry-assist handrail at left of passenger entry
Deluxe exterior mirrors with built-in convex
4" x 16" interior driver/passenger view mirror
High-back driver's seat
Front and rear energy absorbing Romeo Rim Help bumpers
Heavy-duty steel track seating system is integrated into body structure and allows quick and easy seat re-spacing or removal.
All models meet or exceed all applicable FMVSS requirements.
All models are available with ADA compliance packages.

Popular Options (NOTE: This is only a partial listing of optional equipment. For more complete information, contact your ElDorado National representative.) HVAC

Passenger area A/C systems ranging from 52,000 BTU to 120,000 BTU, A/C Carrier and Thermo King
Available with free-blow, overhead ducting or combination
Rear heater from 35,000-70,000 BTU
Stepwell heater, 20,000 BTU
200-amp alternator
Ozone-friendly refrigerant
Cold-climate package
Tropical-climate package

Seating

Perimeter and forward-facing seated floorplans available
Complete range of heavy-duty vinyl and deluxe fabric upholstery
Complete range of seating features including recliners, passenger restraints, head rests, and grab handles
6-way adjustable hydra-mechanical driver's seat

Windows and Doors

Window configurations offer tip-in transom
Titanium tinting on passenger windows
42" x 89" center or dual front/center door
Optional Vapor Slide Glide front and center doors
Entry door interlock
Optional wheel chair doors offer high-solid primed steel frames with corrosion resistant aluminum skin and stainless steel piano hinges.

Comfort, Appearance, and Safety

Full range of radio, stereo audio systems including PA system
Rubber floor or carpet in a wide range of color choices
Stainless steel wheel inserts or aluminum wheels
Front/side destination signs
Front lighted sign with easy access for cleaning
Full range of attractive paint schemes or custom painting and lettering
First aid kit, fire extinguisher, roadside flares/reflectors
Reverse alarm
Motorized and heated exterior mirrors

Paratransit

All models are able to provide handicapped accessibility and meet all applicable ADA requirements
Front and center door paratransit lifts available
Advanced design Mirage F9A cassette lift
All support equipment such as tie-down securements, flip seats, assist handrails, signage, etc. is available

Top ↑ Back →